Standard Solutions · Automatic Liquid Filler
Matrix IA-27 Automatic Liquid Filler
🇺🇸 Made and Supported in the USA
Automatic inline pressure-overflow filling for clean, repeatable visual fill levels — configured around your product, container and line speed.




Starting at
$45,000
Final configuration is matched to your application. Nozzle count, container range and conveyor quoted to suit.
Overview
The Matrix IA-27 is an automatic inline pressure-overflow filling machine built for packers, co-packers and manufacturers who need clean, repeatable visual fill levels across every container. Product is pumped to the overflow nozzles, and once each container reaches its set level, displaced air, foam and excess product return through the overflow circuit — producing a uniform cosmetic fill line from bottle to bottle. It is designed for water-thin to low-viscosity liquids (approximately 1–100 cP) in rigid plastic and glass containers, with a useful commercial target of around 60 bottles per minute for a well-matched application.
The machine is modular — configured around your actual application rather than a generic head count. Nozzle quantity (up to 20), nozzle diameter, container range and the dedicated conveyor are all selected to match your product, bottle and target rate. Height adjustment accommodates containers roughly 1 to 16 inches tall with up to 10 inches of pneumatically actuated nozzle stroke, so changeovers between SKUs stay simple.
The control platform is modular as well. We build the Matrix IA-27 on your choice of Allen-Bradley, Siemens, or Codesys — with VFD-controlled pump and conveyor, bottle-presence sensing, no-bottle / no-fill interlock logic, and fill time, conveyor speed and nozzle setup all managed from the touchscreen HMI. That flexibility lets the filler drop into your existing plant standard instead of forcing a new one.
Control platforms: Allen-Bradley · Siemens · Codesys | Fill range: ~1–100 cP | Target: ~60 BPM | Nozzles: up to 20
Technical Specifications
Current design basis. Final speed, nozzle count, viscosity suitability and container envelope are application-specific.
| Machine type | Automatic inline pressure-overflow bottle filler |
|---|---|
| Typical target speed | Approx. 60 BPM (application-dependent) |
| Reference viscosity | Approx. 1–100 cP at operating temperature |
| Filling nozzles | 316 stainless steel; 3/8, 1/2, 5/8 and 3/4 in insertion diameters; up to 20 positions (actual count depends on container size and spacing) |
| Main frame | Heavy-duty welded 304 stainless-steel frame |
| Overflow tank | 20-gallon stainless-steel tank with cover |
| Filling manifold | 20-hose 304 stainless-steel feeding manifold |
| Product pump | 96 GPM, 1 HP, 3-phase sanitary centrifugal pump; 316 SS product-contact construction with 316L sanitary check valve |
| Container envelope | Height approx. 1–16 in; width/diameter is application-dependent. Rigid plastic and glass containers. |
| Nozzle stroke | Up to 10 in pneumatically actuated travel with magnetic position sensing on hardened SS shafts and linear bearings |
| Controls | PLC + touchscreen HMI on Allen-Bradley, Siemens, or Codesys; VFD pump and conveyor control; bottle-presence sensing; no-bottle / no-fill interlock; Start / Stop / Reset / E-Stop |
| Conveyor (optional) | 10 ft powered stainless-steel conveyor, 4.5 in acetal tabletop chain; speed synchronized with the fill cycle via integrated VFD; working height adjustable to your line |
| Utilities | 220 VAC, 60 Hz, 10 A; 5 CFM at 80 psi clean, dry compressed air |
| Mobility | Heavy-duty casters with stainless-steel leveling |
Built in collaboration with
The Matrix IA-27 is engineered and built in collaboration with Filltronic, combining their filling expertise with Bright IA’s controls, automation and integration.
Let’s match a Matrix IA-27 to your line.
Send us your product, container and target rate and we’ll configure the right machine.



